Table of Contents
Advertisement
To set the Aux Bus Recall Mode:
1.
Press RECALL.
2.
Press NEXT until AuxMem is displayed.
3.
Press the AuxMem knob to set the Aux Bus
Recall Mode. You can choose from the following:
• NoRcll — Aux buses ignore the input saved
with the recalled memory and retain the
current input.
• Recall — Aux bus inputs change to the input
saved with the recalled memory.
For More Information on...
• saving and recalling switcher settings, refer to the
section "Using the Memory System" on page 33.
Customizing the Panel Glow
Panel buttons are set to a glow color which is used
when the button is not selected. This glow color can
be customized.
To customize the Panel Glow color:
1
2
1.
Press MENU.
2.
Press the USER Wipe Pattern button.
3.
Press the Scheme knob to display the Color
Scheme menu.
4.
Use the HUE knob to adjust the Panel Glow hue.
5.
Use the SAT knob to adjust the Panel Glow
saturation.
6.
Use the LUM knob to adjust the Panel Glow
luminance.
Note:
• It is not recommended to set the Panel Glow color
to red. Red indicates a source is on-air.
16
1
3
2
4
5
6
For More Information on...
• hue, saturation, and luminance, refer to the section
"Selecting Colors" on page 4.
Saving Color Schemes
You can save a custom Panel Glow color scheme so
that it may be recalled as needed.
To save a custom Panel Glow color scheme:
2
3
5
1.
Modify the Panel Glow to obtain the desired
appearance.
2.
Press MENU.
3.
Press the USER Wipe Pattern button.
4.
Press the Scheme knob to display the Color
Scheme menu.
5.
Press NEXT until Save is displayed.
6.
Use the Save knob to select the custom scheme
you wish to save.
7.
Press the Save knob to save the color scheme.
8.
Press the Confrm knob to commit the save (if
there was a color scheme saved to the selected
custom scheme, it is overwritten). Press the
Cancel knob to cancel the save.
Loading Color Schemes
You can load a custom color scheme or one of the
preset color schemes that are included on your
switcher.
To load a custom Panel Glow color scheme:
1
2
4
1.
Press MENU.
2.
Press the USER Wipe Pattern button.
3.
Press the Scheme knob to display the Color
Scheme menu.
6
4
5
3
Advertisement
Table of Contents
