JVC KM-H2500 Manual page 35

1. Press and hold SHIFT.
2. Press BLACK/MATTE to display the Matte
menu.
3. Use the corresponding knob to adjust the Hue
(Hue1), Saturation (Sat1), and Luminance
(Lum1) to the desired effect.
Note:
• Mattes may also be selected on the Aux bus. Use
the MATTE button on the desired Aux bus to select
a matte color for that bus.
For More Information on...
• accessing an Aux bus, refer to the section "Aux
Buses" on page 43.
To select a matte color by loading a preset:
3
2 1
1. Press and hold SHIFT.
2. Press BLACK/MATTE to display the Matte
menu.
3. Press NEXT.
4. Rotate the Load knob to select the preset color
you wish to use.
5. Press the Load knob to load the preset color.
Note:
• Mattes may also be selected on the Aux bus. Use
the MATTE button on the desired Aux bus to select
a matte color for that bus.
For More Information on...
• accessing an Aux bus, refer to the section "Aux
Buses" on page 43.
To change the pattern:
5
3
2 1
4
4
1. Press and hold SHIFT.
2. Press BLACK/MATTE to display the Matte
menu.
3. Press NEXT until WASH is displayed.
4. If the WASH knob is Off, toggle it On by pressing
the WASH knob.
5. Use the Pattern buttons to select the desired
pattern.
Note:
• If the wash is turned off, the pattern does not
display.
• Pattern washes are not available on Aux buses.
Using other Adjustments
Mattes can also be adjusted by using these modifiers:
• Size — Size
• X-Pos, Y-Pos — Position
• Aspect — Aspect Ratio
• Border — Border Appearance
• Softness — Edge Softness
• Hue 2, Sat 2, and Lum 2 — Secondary Color
The Aspect function allows you to alter the shape of
the selected wash pattern. For example, if you want
the wash to be oval shaped, select the circular
pattern and adjust the aspect ratio until the desired
oval is created.
Borders are effects created around the selected
pattern for the wash. The Border function allows you
to adjust the appearance of the border.
The Softness function controls the wash edge
appearance. It is a pattern edge effect produced by
mixing key source and key fill signals allowing
variable control of edge softening.
The Hue 2, Sat 2, and Lum 2 functions control the
secondary color. If you are creating a wash and want
to add a second color, adjusting these options will
generate and modify another color set within the
pattern.
To apply other adjustments:
3
2 1
4
29