Example 21: Plus Percentage Sale - Royal ALPHA9155SC Manual

TRANSACTION EXAMPLES FOR OPERATING THE CASH REGISTER
NOTE: Turn the key to the "REG" (REGISTER) position for registering sales transactions.
IMPORTANT: It is not necessary to press the Decimal Point when ringing up a price.
REMINDER: If Clerk Numbers are programmed, be sure to ENTER the (CLERK #), then PRESS the
[CLERK] key before ringing up a sale.
In the examples below, Department 1 is programmed as taxable with a 6% (TAX 1) rate and Department 2 is
programmed for no tax and Clerk #1 is used.

EXAMPLE 21: PLUS PERCENTAGE SALE:

There are various methods of ringing up a Plus Percentage Sale based on the option selected for the flag settings
(refer to Page 37 for details on programming). Choose the example below which best serves your needs:
VERSION 1: In the following two examples, the flag settings for the Plus Percentage are programmed for
all "0":
a. If no tax is programmed in your cash register, ring up a
$1.00 item in Department 2 and apply a pre-programmed
Plus Percentage Rate of 10%:
1. ENTER (100), then PRESS the [DEPARTMENT 2] key.
2. PRESS the [+%] key. If the Plus Percentage Rate
is NOT pre-programmed, type in the plus percentage
rate before pressing the [+%] key.
3. PRESS the [AMOUNT TEND/TOTAL] key.
b. If you want to charge the tax rate on the amount after
the Plus Percentage is added, ring up a $1.00 item in
Department 1 and apply a pre-programmed Plus Percentage
Rate of 10%:
1. ENTER (100), then PRESS the [DEPARTMENT 1] key.
2. PRESS the [+%] key. If the Plus Percentage Rate
is NOT pre-programmed, type in the Plus Percentage
Rate before pressing the [+%] key.
3. PRESS the [AMOUNT TEND/TOTAL] key.
VERSION 2: In the following example, the flag settings for the Plus Percentage Key are programmed for
"100":
If you want to charge the tax rate on the original amount
of an item (the amount before the Plus Percentage is
added), ring up a $1.00 item in Department 1 and apply a
pre-programmed Plus Percentage Rate of 10%:
1. ENTER (100), then PRESS the [DEPARTMENT 1] key.
2. PRESS the [#/ST/NS] key.
3. PRESS the [+%] key. If the Plus Percentage Rate
is NOT pre-programmed, type in the plus percentage
rate before pressing the [+%] key.
4. PRESS the [AMOUNT TEND/TOTAL] key.
DEPT02 1.00
10 +%N 0.10
ITEM CT 1
CASH 1.10
DEPT01 Ⅰ
1.00
10 +%N 0.10
ITEM CT 1
TAX 0.06
CASH 1.16
DEPT01 Ⅰ
1.00
SUB-TTL 1.00
10 +%G 0.10
ITEM CT 1
TAX 0.06
CASH 1.16
79