Example 10: Multiplication Sale; Example 11: Registering A Department Unit Price; Example 12: Multiplication Of A Department Unit Price - Royal ALPHA9155SC Manual

TRANSACTION EXAMPLES FOR OPERATING THE CASH REGISTER
NOTE: Turn the key to the "REG" (REGISTER) position for registering sales transactions.
IMPORTANT: It is not necessary to press the Decimal Point when ringing up a price.
REMINDER: If Clerk Numbers are programmed, be sure to ENTER the (CLERK #), then PRESS the
[CLERK] key before ringing up a sale.
In the examples below, Department 1 is programmed as taxable with a 6% (TAX 1) rate and Clerk #1 is used.
EXAMPLE 10: MULTIPLICATION SALE - (Ring up a $1.00 item 3 times in Department 1):
1. ENTER (3), then PRESS the [QTY/TIME] key.
2. ENTER (100), then PRESS the [DEPARTMENT 1] key.
3. PRESS the [AMOUNT TEND/TOTAL] key.
Note: The range of numbers from .01 to 9999.99 can be
used when ringing up the quantity of an item.
EXAMPLE 11: REGISTERING A DEPARTMENT UNIT PRICE - (Assume Department 1 is pre-programmed for
$1.00.Ring up this price):
1. PRESS the [DEPARTMENT 1] key.
2. PRESS the [AMOUNT TEND/TOTAL] key.
EXAMPLE 12: MULTIPLICATION OF A DEPARTMENT UNIT PRICE - (Assume the Department 1 key is pre-
programmed for $1.00. Ring up this price three times):
1. ENTER (3), then PRESS the [QTY/TIME] key.
2. PRESS the [DEPARTMENT 1] key.
3. PRESS the [AMOUNT TEND/TOTAL] key.
74
3Q @1.00
DEPT01 Ⅰ
3.00
ITEM CT 3
TAX 0.18
CASH 3.18
DEPT01 Ⅰ
1.00
ITEM CT 1
TAX 0.06
CASH 1.06
3Q @1.00
DEPT01 Ⅰ
3.00
ITEM CT 3
TAX 0.18
CASH 3.18