Wide Characters - Royal ALPHA9155SC Manual

PROGRAMMING ALPHANUMERIC DESCRIPTIONS
The following outlines the maximum number of characters that can be programmed for each item description.
DEPARTMENT
PLU
CLERK NAME
STORE LOGO/HEADER
COMMERCIAL MESSAGE
* Standard size characters. For Double Width, see below.
Please Note: The instructions for programming Department Descriptions is on Pages 28-32.
The instructions for programming PLU Descriptions is on Page 38-39.
The instructions for programming Clerk Descriptions is on Pages 20-21.
The instructions for programming Commercial Messages is on Pages 49-51.

WIDE CHARACTERS

For extra emphasis, you can program extra wide (double width) for each character.
If using double width characters, the maximum number of characters is reduced by half. For example,
Departments would normally use 16 characters, for double width, the maximum is 8 characters; PLUs would
normally use 16 characters, for double width, the maximum is 8 characters.
To make a character print extra wide, the double width code of "01" must be used before each character.
Normal Size
************************
YOUR RECEIPT
Thank You
Call again
************************
APPLE 1
MILK 1
ITEM CT 2
TAX
CASH 3.06
03-24-2002
CLERK01
48
-
-
-
-
-
1.00
2.00
0.06%
PM 04:14
0006
16 Characters *
16 Characters *
24 Characters *
9 Lines (24 Characters* each)
9 Lines (24 Characters* each)
Double Width
************************
YOUR RECEIPT
Thank You
Call again
************************
APPLE 1
MILK 1
ITEM CT 2
TAX
CASH 3.06
03-24-2002 PM 04:14
CLERK01
(Continued)
1.00
2.00
0.06%
0006