Checking Supplied Items; Part Names And Functions; Front View; Rear View - Roland ColorCAMM PNC-5000 User Manual

1 Checking Supplied Items

Check the following to make sure that you received all the items that were shipped along with the unit.
• Power Cord
• Blade (Carbide)
• Roller Base
• Material for Test Cuts
• Head Cleaner
• Hexagonal Screw Driver

2 Part Names and Functions

2-1 Front View

Printing Carriage
The ribbon cartridge is mounted here.
Pinch Roller (Left)
Press material against the grit roller. When loading
material, place the left roller inside the left edge of the
material to correctly track it through the machine.
Platen
Grit Roller (Left)
Guide Line
Align the material with these lines when loading.
Grit Roller (Right)

2-2 Rear View

Guide Line
Align the material with
these lines when loading.
Sheet Loading Lever
Used to raise or lower the pinch rollers
when loading or unloading material.
: 1 • Thermal transfer ribbon cartridge
: 1 • Blade Holder
: 1 • Cutter Tool
: 1 • Alignment Tool
: 1 • Cleaning Sheet for Printing Head
: 1 • User's Manual
Operation Panel
1 Checking Supplied Items / 2 Part Names and Functions
: 1
: 1
: 1
: 1
: 1
: 1
Cutting Carriage
The blade holder is mounted here.
Pinch Roller (Right)
This presses the material against the grit roller.
Serial (RS-232C) Input Connector
In a serial configuration, connect the serial cable here.
This cable carries data to your computer.
Parallel (Centronics)
Input Connector
In a parallel configuration,
connect the parallel cable
here. This cable carries
data to your computer.
Cutter Force Control Slider
Sets the down force for the cutting tool.
Power Connector (AC IN)
This connector accepts standard AC
power cord.
Power Switch
DIP Switches
Used to make various
settings.
3