Roland R-26 Owner's Manual page 93

Category Menu item / Effect
INT MIC
(p . 36)
ANALOG
IN (p . 38)
*1
*2
INPUT SETUP
PLUGIN
MIC (p . 40)
*1 Settings for "INPUT2" will be displayed only when "SEPARATE" has been set for INPUT TYPE.
*2 Settings for "MS-MIC WIDTH" will be displayed only when "MS mic" has been set for INPUT TYPE.
LIMITER
Turns the limiter on/off.
LCF SW
Turns the low-cut filter on/off.
LCF CUTOFF
Specifies the frequency of the
low-cut filter.
INPUT TYPE
Specifies the external input type.
INPUT1 PHANTOM
Specifies whether phantom power
will be supplied to the ANALOG IN
1/L jack.
INPUT1 LIMITER
Turns the limiter on/off.
INPUT1 LCF SW
Turns the low-cut filter on/off.
INPUT2 PHANTOM
Specifies whether phantom power
will be supplied to the ANALOG IN
2/R jack.
INPUT2 LIMITER
Turns the limiter on/off.
INPUT2 LCF SW
Turns the low-cut filter on/off.
LCF CUTOFF
Specifies the frequency of the
low-cut filter.
MS-MIC WIDTH
Adjusts the width of the sound.
MIC TYPE
Specifies the type of plug-in mic.
PLUG-IN POWER
Specifies whether power will be
supplied to the plug-in mic.
LIMITER
Turns the limiter on/off.
LCF SW
Turns the low-cut filter on/off.
LCF CUTOFF
Specifies the frequency of the
low-cut filter.
Settings for the R-26
Value (default value: bold)
OFF, ON
OFF, ON
100 Hz, 200 Hz, 400 Hz
SEPARATE, LINK, MS-MIC
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
100 Hz, 200 Hz, 400 Hz
0–5–10
STEREO, MONO
OFF, ON
OFF, ON
OFF, ON
100 Hz, 200 Hz, 400 Hz
93