Using Loop Back - Roland R-26 Owner's Manual

Listening to the Computer's
Playback Through the R-26
Audio played back by your computer
can be heard via USB through the output
system connected to the R-26. This audio
can also be recorded by the R-26 itself.
1.
In the audio playback software on
your computer, switch the audio
output destination to the R-26 .
For details on switching the audio output
destination, refer to the manual for the
software you're using.
Recording the playback on the R-26 itself
1.
Choose [MENU]
Ú
SETUP> <REC SOURCE> (p . 31) .
Ú
2.
Choose <FROM PC> .
Setting Description
Signal from the R-26 being input
TO PC
to the computer
Signal from the computer being
FROM PC
input to the R-26
<REC
Connecting to Your Computer via USB

Using Loop Back

The R-26's Loop Back function allows
you to mix the R-26's own input with
the sound being played back by your
computer software, and send this back to
the computer. You can use this to add a
narration to music that you're playing back
and re-record it anew on your computer, or
to create streams for distribution.
1.
Touch AUDIO IF tab .
2.
Touch the <LOOP BACK> to turn it
on/off .
3.
Touch the knob icon to adjust the
volume of the sound being played
back on your computer .
Touch to adjust the volume.
91