Manual Marking - Roland R-26 Owner's Manual

Assigning a Marker
During Recording
Here's how to assign a marker to the project
during recording.
Once you've assigned markers, you'll be
able to jump to the marked locations by
touching in the MARK tab during
playback. "Assigning Markers in a Project"
(p. 64)
* Markers cannot be assigned to an MP3
format project.

Manual Marking

1.
Start recording .
2.
Touch the MARK tab (p . 17) .
3.
At the moment you want to assign a
marker, touch <SET> .
Touching <CLEAR> will delete the most
recently assigned marker.
Specifying the Interval or
Level for Automatic Marking
You can make the R-26 automatically assign
markers to the project being recorded,
either at specified intervals of time, or
whenever the input level falls below a
specified value.
1.
Choose [MENU]
Ú
<AUTO MARK> .
"AUTO MARK" is located on page 2/3. Touch
to access 2/3.
2.
Touch the desired time interval or
level .
Setting
OFF
5 min
10 min
30 min
LEVEL1 (-60 dB)
LEVEL2 (-30 dB)
LEVEL3 (-20 dB)
Recording
<REC SETUP>
Ú
Description
Time interval for
automatic marking
Input level for
automatic marking
49