Roland R-26 Owner's Manual page 84

Connecting to Your Computer via USB
Disconnecting from Your
Computer
Here's how to disconnect the R-26 from
your computer. You must use the following
procedure to end the connection before
you disconnect the USB cable.
NOTE
Do not switch off the R-26's power,
disconnect the USB cable, or remove the
SD card while the R-26 is connected to your
computer.
Windows 7
1.
In the Windows task tray, click
icon, and then
2.
Click on the message "Eject R-26"
appears above the task tray .
When you see the message "Safe to Remove
the Hardware", you can disconnect the USB
cable that's between the R-26 and your
computer.
84
icon .
Windows Vista/Windows XP
1.
Access the "Safely Remove Hardware"
dialog box .
In the Windows task tray, double-click the
Safely Remove Hardware
2.
In the list of hardware devices shown,
choose the item corresponding to the
R-26 .
OS
Windows Vista
Windows XP,
4.
In the dialog box, click <Stop> .
5.
Click [OK] .
When the stop hardware device dialog box
appears, choose the item corresponding to
the R-26's SD card, and click [OK].
6.
Disconnect the connection .
When you see the message "The device (or
USB disk) can now be safely removed from
the computer, " you can disconnect the USB
cable that's between the R-26 and your
computer.
icon.
Indication
USB mass storage device
USB mass storage device