Roland R-26 Owner's Manual page 81

Exchanging Files With
Your Computer (Storage)
WAV files or MP3 files can be copied from
the R-26 to your computer, or from your
computer to the R-26. To copy files, use
your computer to drag and drop them.
Connecting the R-26 to
Your Computer
1.
Start up your computer .
2.
Make sure that an SD card is inserted
in the R-26's SD card slot .
"Preparing an SD Card" (p. 26)
3.
Switch on the R-26's power (p . 24) .
4.
Use the included USB cable to
connect the R-26 to your computer .
USB Connector
R-26
Computer
Connecting to Your Computer via USB
5.
Select the mode (only if you've
chosen "SELECTABLE") .
If the USB CONNECTION (p. 80) is set to
"SELECTABLE, " a selection screen will
appear when you connect the R-26 to your
computer, allowing you to select either
storage mode or audio interface mode. For
this example, touch <STORAGE>.
If the R-26 is connected to your computer in
storage mode, the R-26's display will show
the "USB Storage" screen.
* If you've chosen "STORAGE" as the
USB connection mode, this screen will
appear when you use a USB cable to
connect the R-26 to your computer.
81