Operating Your Radio - Search Tuning; Volume Control; Telescopic Aerial - Roberts R9947 Manual

3-band pll synthesised stereo radio

Table of Contents

Operating your radio - search tuning

1. Switch on your radio by pressing the On/

Off button.

2. Select the required waveband by repeat

pressing of the Band button. The wave-

band selected will appear in the display. On

FM fully extend the Telescopic aerial. On

MW and LW rotate your radio for best

reception.

3. Press and hold down either the Tuning + or

- buttons until the frequency in the display

begins to change rapidly. Release the but-

ton.

4. Your radio will scan the selected wave-

band, stopping each time it finds a station

of sufficient strength. Adjust the Volume

control to the required level.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Table of Contents