Operating Your Radio - Fm - Roberts R9962 Manual

Operating your radio - FM

1. Switch on your radio by sliding the Power On/
Off switch to the On position.
2. Slide the Waveband selector switch to the
FM position.
3. Adjust the Volume control until a hissing
sound is heard.
4. Rotate the Tuning control to select the de-
sired station. The Tuning indicator will light
when the station is correctly tuned. On FM the
Tuning scale is marked in Megahertz (MHz).
5. For FM reception fully extend the Telescopic
aerial and then angle and rotate for best
reception.
6. Adjust the Volume to the required setting.
7. To switch off your radio slide the Power On/
Off switch to the Off position.
5
Power
On
Off
1
3
6
2
SW LW MW FM
4
Power
On
Off
7