Setting The Alarms To Wake To Radio; Setting The Alarms To Wake To Cd - Roberts CR9916 Manual

Setting the alarms to wake to radio

1. Set the alarm time as previously described. Set the Alarm function
switch to the 'Music' position. Set the Alarm 1 or Alarm 2 selector
switch to the 'On' position. The corresponding Alarm indicator will
light.
2. Select the required waveband and ensure that a station is tuned in and
the Volume control is set to the desired level. Press the Power
button to switch off your CD clock radio, the Power indicator will
switch off.
3. The radio alarm will sound every day at the preset time for 60 minutes.
To turn off the alarm until the next day press the Power button. To turn
off the alarms permanently set the Alarm 1 or Alarm 2 function
switch to the 'Off' position.

Setting the alarms to wake to CD

1. Set the alarm time as previously described. Set the Alarm function
switch to the 'Music' position. Set the Alarm 1 or Alarm 2 selector
switch to the 'On' position. The corresponding Alarm indicator will
light.
2. Set the Function switch to the 'CD' position, insert a CD and ensure
that the Volume control is set to the desired level. Press the Power
button to switch off your CD clock radio, the Power indicator will
Important: failure to switch off the power will
switch off.
result in non operation of the alarm.
3. The CD will play every day at the preset time for a maximum of 60
minutes. To turn off the alarm until the next day press the Power
button. To turn off the alarms permanently set the Alarm 1 or Alarm
2 function switch to the 'Off' position.
11
Music
Buzz
PM
1
Power
1
Off
Adj
Music
On
Off
Buzz
2
PM
1
Power
1
Adj
On
Off
2
2
1
Adj
On
Off
2
Adj
CD
MW
FM
FMSt.
2
1
Adj
On
Off
2
Adj