JUKI HZL-E61 Service Manual page 9

4. Front panel and rear panel
5. Thread spool cover
Remove setscrews (bottom) (10) and (11) in the
front panel (Mas. asm.).
(10)
Remove setscrews (12), (13) and (14) in the rear panel (asm.)
and setscrew (rear) (15) in the front panel (Mas. asm.).
(Lift the presser lifting lever when removing screw (15).)
(12)
Remove setscrew (upper) (16) in the thread spool cover and
setscrew (side) (17) in the thread spool cover. (Lower the thread
take-up support and insert a screwdriver from the face cover
side to remove setscrew (side) (17) in the thread spool cover.)
Open the rear panel in the rear and remove the thread spool
cover upward.
(17)
Thread take-up support
-6- -6- -6- -6- -6-
(11)
(13)
(14)
(15)
(16)
(17)