5-1-16 Adjusting the position of the BH switch
Remove the face cover.
How to adjust
1. Attach the BH foot and lower the presser foot.
2. Lower the buttonholing.
3. Select BH (
4. Loosen setscrews (5) and (6) in the BH switch base.
5. Move the switch base and adjust so that the clearance with the asterisk
6. Put a sheet of paper under the BH presser, perform idle stitching without
) with the pattern selector button.
mark * is 0.2 to 0.4 mm.
threading and check the return position and the stopping position of BH.
Perform re-adjustment if there is any trouble.
If these tests are OK, perform threading and sewing test of BH.
*
(6)
0.2 to 0.4 mm
(5)
- 1 9 -
- 1 9 -
- 1 9 -
- 1 9 -
- 1 9 -