Reverse Stitch; Straight Stitch - JUKI HZL-30Z Instruction Manual

9.
Remove the fabric from
the machine.
HZL-30Z
HZL-60
After finishing a seam, raise the
needle and the presser foot,
and slowly pull the fabric from
under the presser foot.

Reverse stitch

1.
stitch button. Begin
[2]
sewing.
[1]
Fabric
[3]
The reverse stitch is
used at the beginning
and end of a seam to
secure it.
15
10.
Cut the threads, using
the thread cutting groove.
HZL-30Z
Thread cutter
HZL-60
Thread
cutting
groove
Hold the upper and bobbin
threads together, pull them out
about 4" and cut them with the
thread cutting groove located
at the rear of the presser foot.
2.
Press the reverse from the reverse
stitch button, sew
the straight stitch.
HZL-30Z HZL-30Z
HZL-60 HZL-60
11.
Knot the threads on the
wrong side of the fabric.
Pull the upper thread to the
wrong side of the fabric, and
knot the upper and bobbin
threads. Cut the threads as
close to the knot as possible.
This technique is useful for
securing the pattern stitches.
Beginning of sewing heavy-weight fabric
[HZL-30Z]
To start sewing from the
multi-layer material edge,
use the button mounted on
the presser foot to make the
presser foot parallel to the
fabric, thereby ensuring
smooth sewing.
Detach the finger
3.
Press the reverse
stitch button.
HZL-30Z
HZL-60
For elastic fabric

straight stitch

Finished seams are
elastic.
This stitch system
can be used for pro-
d u c i n g s t r a i g h t
stitches on elastic
fabrics such as knits
and jersey.
Pressing the button (spring) that is
mounted on the presser foot into
the groove in the presser foot
holder, lower the presser foot.
4.
Stop sewing.