Zigzag Stitch; Stitch Width Vs Stitch Length; Overcasting - JUKI HZL-30Z Instruction Manual

Zigzag Stitch

1.
Select a stitch pattern.
HZL-30Z
(S)
(M)
(L)
HZL-60
(S)
(M)
(L)

Overcasting

Used to prevent fabric from fraying.
1.
Select a stitch pattern.
HZL-30Z
(L)
HZL-60
(L)
There are three stitch types
that can be used for overcast-
ing.
CAUTION:
Make sure to turn off the machine before changing the presser foot.
2.
Make sure that the
presser foot is correct.
HZL-30Z
Standard presser
foot (A)
HZL-60
Standard presser
foot (A)
CAUTION:
Make sure to turn off the machine before changing the presser foot.
2.
Replace the presser foot.
HZL-30Z
Standard presser foot (A)
(L)
Overcasting foot (C)
HZL-60
Standard presser foot (A)
(L)
Overcasting foot (C)
Stitch width vs.stitch length
(S) 1.5 (M) 3.3
~ ~
0.5 4 0.5
3.
Set the stitch length.
HZL-30Z
1 ~ 2
Automatic
stitch length
HZL-60
1 ~ 2
Automatic
stitch length
(L) 5
~
4 0.5 4
4.
In case of the overcasting
presser foot.
HZL-30Z
Guide
HZL-60
Guide
Place the fabric against the foot
guide so that the needle sews
close to the edge.
16