JUKI HZL-30Z Instruction Manual page 9

4.
Follow threading path into the bobbin winder thread
guide.
HZL-30Z
HZL-60
Hook the
thread into
the thread
guide.
7.
Push the bobbin back
to the left.
HZL-30Z
HZL-60
Cut the thread and take the
bobbin off the shaft.
Hook the thread into
the thread guide.
8.
Place the bobbin in
case with thread pulling
off as illustrated.
HZL-30Z
HZL-60
5.
Place the bobbin on the
bobbin winding shaft.
HZL-30Z
Bobbin
winder
Bobbin winding
regulator
HZL-60
Bobbin winding
regulator
Bobbin
winder
Press the bobbin against the
bobbin winding regulator.
9.
Pull the thread into the
groove of the bobbin
case.
HZL-30Z
[2]
[1]
HZL-60
[2]
[1]
Thread [1], place the thread on
the groove [2] and draw thread
to rear of machine.
6.
Depress speed
controller to wind bobbin.
10.
Close the hook cover.
HZL-30Z
HZL-60
8