Reverse Stitch - JUKI HZL-30Z Instruction Manual

9. 10.
Remove the fabric from
the machine. the thread cutting groove.
HZL-30Z
HZL-60
After finishing a seam, raise the Hold the upper and bobbin
needle and the presser foot, threads together, pull them out
and slowly pull the fabric from about 4" and cut them with the
under the presser foot. thread cutting groove located
at the rear of the presser foot.

Reverse stitch

1.
Press the reverse
stitch button. Begin
[2]
sewing.
[1]
HZL-30Z
Fabric
[3]
The reverse stitch is
used at the beginning
and end of a seam to
secure it.
HZL-60
15
All manuals and user guides at all-guides.com
11.
Cut the threads, using
wrong side of the fabric.
HZL-30Z
Thread cutter
HZL-60 Pull the upper thread to the
wrong side of the fabric, and
knot the upper and bobbin
Thread
threads. Cut the threads as
cutting
close to the knot as possible.
groove
This technique is useful for
securing the pattern stitches.
2.
Detach the finger
from the reverse
stitch button, sew
the straight stitch.
HZL-30Z
HZL-60
Knot the threads on the
Beginning of sewing heavy-weight fabric
[HZL-30Z]
Pressing the button (spring) that is
mounted on the presser foot into
the groove in the presser foot
holder, lower the presser foot.
To start sewing from the
multi-layer material edge,
use the button mounted on
the presser foot to make the
presser foot parallel to the
fabric, thereby ensuring
smooth sewing.
3.
Press the reverse
stitch button.
HZL-30Z
HZL-60
For elastic fabric
straight stitch
Finished seams are
elastic.
This stitch system
can be used for pro-
d u c i n g s t r a i g h t
stitches on elastic
fabrics such as knits
and jersey.
4.
Stop sewing.