Blindstitch; Hzl-30Z - JUKI HZL-30Z Instruction Manual

Blindstitch

Blind stitching provides a durable way to finish a hem and is
presented as an instantly selectable pattern as a convenience.
It takes practice, however, so a test sample is suggested.
1.
Overcast the fabric,
and fold the edge.
1. Fold the fabric and then baste it.
0.5~0.6 cm
Fabric
(wrong
side)
Basting
2. Fold the fabric at
the basting stitch seam.
Fabric
(wrong
side)
3.
Fabric
(wrong
side)
Refer to page 16 for overcasting.
5.
Turn the fabric over.
Fabric Fabric
(wrong side) (right side)
Finished hem
After sewing the seam, turn the
fabric over.
CAUTION:
Make sure to turn off the machine before changing the presser foot.
2.
Select the blindhem
stitch pattern.

HZL-30Z

Finished
hem
For
elastic
fabric
stitch
HZL-60
For
elastic
fabric
stitch
* Set the stitch length.
HZL-
30Z
:2~4
HZL-
60
How to adjust stitch width
If the stitches fail to reach the folded edge:
If the stitches reach too far beyond the folded edge:
3.
Change the presser
foot.
HZL-30Z
Blindstitch presser foot (D)
HZL-60
Blindstitch presser foot (D)
:1.5~3
HZL-30Z
HZL-30Z
4.
Position the folded
edge against the guide.
Fabric
(wrong
side)
Place the folded edge
against the presser foot
guide, and sew the fabric.
Turn the screw
HZL-60
toward you.
This will move the
guide to the right.
Place the foded
edge sungly
against the reposi-
tioned guide.
Turn the screw
HZL-60
away from you.
This will move the
guide to the left.
Place the foded
edge sungly
against the reposi-
tioned guide.
Guide
20