Stitch Length In The Normal Feed And Reverse Feed - JUKI LU-2210N-7 Engineer's Manual
1/2-needle, high-speed, unison-feed lockstitch machine with vertical-axis large hook and automatic thread trimmer/2p dial/needle thread clamp device/2p dial
Hide thumbs
Also See for LU-2210N-7:
- Instruction manual (21 pages) ,
- Brochure & specs (8 pages) ,
- Handbook (272 pages)
Table of Contents
Advertisement
2) Stitch length in the normal feed and reverse feed
Stitch length will change in accordance with the positions of the marking (chamfered section) of the feed
adjusting eccentric pin
• If the marking is tilted in the direction of arrow A .......... The stitch length of the normal feed stitching will
• If the marking is tilted in the direction of arrow B .......... The stitch length for the normal feed stitching
Slot
Standard Adjustment
with respect to the slot in the feed adjusting change arm
B
A
– 32 –
decrease.
The stitch length of the reverse feed stitching
will increase.
will increase.
The stitch length of the reverse feed stitching
will decrease.
To improve ease of operation, set the
stitch dial
to the maximum value
on the scale before loosening the set
screw
.
Marking (chamfered)
as described below:
- Quick Links:
- Lu-2210N/W-7
- Lu-2212N-7
Hide quick links:
Advertisement
Table of Contents
