Changing The Frequency Of Remote Control Signal - InFocus IN5542 Service Manual

6-5-2 Putting batteries into the remote control
• Use two new batteries of the specified type: HITACHI MAXELL or HITACHI MAXELL ENERGY part
number AA Alkaline (LR6 or R6P).
1. Remove the battery cover.
Slide back and remove the battery cover in the direction of the arrow.
2. Insert the batteries.
Align and insert the two AA batteries according to their plus and minus terminals as indicated in the
remote control.
3. Close the battery cover.
Replace the battery cover in the direction of the arrow and snap it back into place.

Changing the frequency of remote control signal

Changing the frequency of remote control signal
The accessory remote control has the choice of
mode 1 or mode 2, in the frequency of its signal.
The accessory remote control has the choice of mode 1 or mode
If the remote control does not function properly,
2, in the frequency of its signal. If the remote control does not
attempt to change the signal frequency.
function properly, attempt to change the signal frequency. Please
Please remember that the "REMOTE FREQ." in
remember that the "REMOTE FREQ." in SERVICE item of
SERVICE item of OPTION menu of the
OPTION menu of the projector to be controlled should be set to
projector to be controlled should be set to the
same mode as the remote control.
the same mode as the remote control. To set the mode of the
To set the mode of the remote control, slide the
remote control, slide the knob of the frequency switch inside the
knob of the frequency switch inside the battery
battery cover into the position indicated by the mode number to
cover into the position indicated by the mode
choose.
number to choose.
● About Laser pointer
This remote control has a laser pointer in place of a finger or rod. The laser beam works and the LASER
INDICATOR lights while the LASER button is pressed.
lights.
C A U T I O N
C A U T I O N
LASER RADIATION-
LASER RADIATION-
DO NOT STARE INTO BEAM
DO NOT STARE INTO BEAM
MAX. OUTPUT: 1mW
or MAX. OUTPUT: 1mW
WAVE LENGTH: 650nm
WAVE LENGTH: 650nm
CLASS2 LASER PRODUCT
CLASS2 LASER PRODUCT
LASER RADIATION
LASER RADIATION
DO NOT STARE INTO BEAM
DO NOT STARE INTO BEAM
CLASS2 LASER PRODUCT
CLASS2 LASER PRODUCT
MAX OUTPUT : 1mw
MAX OUTPUT : 1mw
WAVE LENGTH : 650nm WAVE LENGTH : 650nm
IEC60825-1 :1993 + A1 : 1997 + A2 : 2001
IEC60825-1 :2007 EN60825-1:2007
ビームをのぞきこまないでください。
ビームをのぞきこまないでください。
最大出力 １ｍW
最大出力 １ｍW
波長 ６５０ n m 波長 ６５０ n m
クラス２レーザ製品 クラス２レーザ製品
JIS C 6802:1997/98
Use the laser beam of the remote control only for the pointer on the screen. Do not apply the
laser beam to anything except the screen.
• Never hit eyes by the laser beam since the laser beam can injure eyes.
• Do not apply the laser beam to anything except the screen.
IN5542 ( P6X ) / IN5544 ( P6WX )
JIS C 6802:2005
WARNING
Frequency switch
remote control
Laser aperture
LASER INDICATOR
28
Inside of
the battery cover
Back of the
LASER button