Media Order Jobs - HP Data Protector A.06.11 User Manual

2. Select the medium you want to initialize and click Initialize Highlighted Media.
Media Operations automatically initializes selected medium using the barcode
label for the media label. Enable Force Initialize if a medium contains data.
Max Drives Used determines how many drives inside the library can be used
for initialization. Media Operations automatically selects idle drives inside
the library; if more media are selected than drives available, the request is
queued until a drive becomes available. This is shown as Waiting for open
drive in the status.
3. If the selected library has more than one drive block size, a drop-down list
appears giving you the option of using all drives or specifying a drive block
size (32k or 64k), so that only the drives matching the specified block size
are used for initialization.
4. After this group of media is initialized, click Done to return to the details
screen. If more media are required, select the next library the media are
loaded in and repeat the process until the job is complete.
If media initialization fails, the status is displayed with the red error icon.
Double-click the failed medium for additional details.
5. After all media are initialized, click Mark As Complete to finish the job.
6. On accepting the print dialog, you get printouts detailing all initialized media
for this job. If printing fails, you can reprint the information later by clicking
History on the job list.

Media order jobs

If Blank Bin is enabled on the Site Configuration screen and there are not sufficient
blank media to meet the requirements of future scratch init jobs, media order jobs
are created to order new blank media.
To activate media reordering:
User guide 113