Confirming Mount Request Jobs; Manual Vaulting Jobs; Interactive Mount Requests - HP Data Protector A.06.11 User Manual

• Manual Vaulting to move media into/out of scratch bins in mass. You can also
remove media from a section of the available media locations and place them
into the holding bin or vault. See
• Add Init to add a new request for media initialization.
Import to import a media job from remote accounts. Use this to create jobs not
•
automatically created on the system due to communication/access issues.
• History to view or re-send a completed checkout request job to an offsite vendor.
See "Viewing job

Confirming mount request jobs

1. Select a scratch medium from the Available scratch media: list or scan/type a
medium into the verify field.
2. Once the medium is pulled from the scratch bin and verified, click Mark as
Complete to verify the mount request.
• If no scratch media are available, cancel the request.
• If you cannot locate any of the available scratch media, select one and mark
the request as an exception to remove it. This adds the lost scratch medium
to the exceptions list.
Figure 49 Interactive mount requests
.

Manual vaulting jobs

Manual vaulting moves media into/out of the vault in mass. You can also move media
from dismount lists not on a regular vaulting job. This allows you to slot media from
"Manual vaulting
history" on page 122 for additional information.
jobs" on page 121 for details.
User guide 121