Service Logs; Changing The Logging Level - HP Data Protector A.06.11 User Manual

Service logs

Changing the logging level

1. Open the communications configuration file on the DMComms host:
• Windows:
nl
<DMComms_Install_Location>\DMComms\config\bbc_config
• HP-UX, Linux and Solaris:
/etc/opt/hpdmcomms/config/bbc_config
2.
Change the LOG_LEVEL in the [com.hp.ov.ipcserver] section. Valid
settings are:
[com.hp.ov.ipcserver]
SERVER_PORT = 25556
SECURE_COMM = SSL
SSL_PROVIDER = JSSE
SSL_CA_CERTIFICATE_FILENAME = /opt/hpdmcomms/certs/ca.jks
SSL_CA_CERTIFICATE_FORMAT = JKS
SSL_KEYSTORE_FILENAME = /opt/hpdmcomms/certs/server.jks
SSL_KEYSTORE_FORMAT = JKS
SSL_CLIENT_VERIFICATION_MODE = Anonymous
SSL_ENCRYPTION_LEVEL = Export
LOG_LEVEL=WARNING
3. Windows only:
nl
You can change LOG_LEVEL in the [com.hp.ov.ipcclient.rpc] section.
Valid settings are:
[com.hp.ov.dm.ipcclient.rpc]
SECURE_COMM = SSL
SSL_PROVIDER = JSSE
SSL_CA_CERTIFICATE_FILENAME = REPLACE_WITH_CA.JKS
SSL_CA_CERTIFICATE_FORMAT = JKS
SSL_ENCRYPTION_LEVEL = Export
LOG_LEVEL=SEVERE
SERVER_PORT=25556
HTTP_PIPELINE=false
DISABLE_EXPECT_100=true
REQUEST_TIMEOUT=0
RESPONSE_TIMEOUT=0
SSL_KEYSTORE_FILENAME = REPLACE_WITH_SERVER.JKS
SSL_KEYSTORE_FORMAT = JKS
162 Diagnostics and tuning