HP Data Protector A.06.11 User Manual page 149

NOTE:
You must have Java (v1.2 or higher) installed on the system on which you want to
run the utility.
Syntax
<java exe> -cp <full path to reactivemount.jar file>
com.hp.ov.dm.reactivemount.DoReactiveMount <param list...>
Parameters
Mandatory parameters:
-m
-s or
-mp
-d
-u
-p
-c
Optional parameters:
-r
-ml
-sn
-b
Name of the Media Operations Server name to which to send the reactive mount
request.
Name of the backup specification requiring media to be mounted. Name of the
Media Pool needing to be mounted in the specified device. This parameter is
only valid if you define -c.
Name of the drive in the backup specification to which to load the scratch media.
User Name (a valid Media Operations username for authentication)
User Password (a valid Media Operations password for authentication)
Backup Manager (the Cell Manager that has a mount request). If the reactive
mount request is for a manually created backup specification, do not define this
parameter.
Name of requestor for tracking purposes
Media label of the scratch media to load into the device
Serial number of the scratch media to load into the device
Barcode of the scratch media to load into the device
User guide 149