Software Management
Manual Download of Configuration Files
The automated configuration management provided by the Twin Client Manager
eliminates the need for manual terminal configuration. However, this function can be
Terminals
Send Configuration Files to
accomplished manually by clicking on
and
Terminal.
LD
Enter
On the terminal, type "
" at the DOS prompt, but do not
at this time.
Note:
This procedure assumes that the PowerNet Twin Client was previously installed.
The following screen appears.
Enter
OK
.
Choose
on the terminal while choosing
at the prompt above
Boot the terminal.
The terminal is now ready to begin a Telnet session with the new configuration files.
Terminal
Receive File from Terminal
Under
, you may select
.
Enter the path and file name to receive from the terminal in the Upload File dialog box.
"rf.log"
OK.
The default file is
. Click on
•
2-43
Supported Equipment Manual
May, 2006