Table of Contents
Advertisement
Click on the
group. Next, click on the
configuration file saved earlier.
Check the
addresses, software, and configuration files to the terminals. Click on the
upper right corner to return to the main menu.
Note:
The software does not need to be authorized now. It can be authorized later, after a
Downloading Files To Terminal
Twin Client program and configuration files are installed on the terminal with the
following procedure. Boot the terminal according to the instructions in the next section.
At the DOS prompt, type "
Under the
Supported Equipment Manual
+
Terminal/Group Manager
sign in front of
New Group
Active
box, and the system is now configured to automatically download IP
Telnet session has been established. The procedure is described in Authorizing
PowerNet.
LD
" but do not
Terminal
menu, click on the
•
May, 2006
to access the default terminal
Browse
icon and use the
Enter
at this time.
Send Program Files to Terminal
Quick Start
button to select the
box in the
menu option.
2-11
Advertisement
Table of Contents
