Table of Contents
Advertisement
Terminal Setup
Standard Setup
The default terminal setup is sufficient for most installations. However, to meet site-
specific requirements, it may be necessary to customize terminal operation. The standard
setup options simplify this process and can be modified by the following methods:
•
Using the Twin Client Manager.
•
Using the Twin Client terminal menu system.
Standard Setup describes how to use the Twin Client Manager and the terminal menu
systems to set up the terminal. Also described are the methods for authorizing the
terminal software.
Setup Using Twin Client Manager
The Twin Client Manager provides a Standard Settings tab for the automatic setup of
terminals. Choose
according to the emulation selected, each of which is described below.
VT Settings
Select the VT emulation setup by clicking on the
menu, as shown below.
Then click on the
Click on
menu. The standard settings tab will now reflect the settings for VT emulation.
2-14
Standard
from under the
vt100
vt220
or
OK
after the selection is made, and return to the main Twin Client Manager
View
menu. The options within this tab vary
Settings
selection, as shown below.
Supported Equipment Manual
Emulation
menu and then the
•
May, 2006
Advertisement
Table of Contents
