Table of Contents
Advertisement
Terminal Setup
Printer Type
This scrolling list selects the attached printer type. The default value is
that no printer is attached.
Terminal Setup Using Twin Client Menus
For compatibility with other PowerNet products, the PowerNet Twin Client for PSC also
supports the standard Twin Client configuration menu system on the terminal. This menu
system is accessed by pressing uppercase
Twin Client
© 1991-2006, Connect, Inc.
Keypress to Continue
The following menu appears.
Edit Network
Edit Mobile Unit IP
Edit Server/Host IPs
Edit License Key
Run Site Survey
Switch Client Modes
Run Client Emulator
Exit to OS
Use the
the highlighted option. Each menu option is described below.
Edit Mobile Unit IP
The IP list contains the terminal IP address, the Subnet Mask and the Router IP address.
Enter the appropriate address. Select
IP 206.232.71.38
SN 255.255.255.0
RT 206.232.71.1
<F3> Save <F7> Quit
Edit Server/Host IPs
If the host IP address(es) were not pre-configured as described in the Setting the Servers
section of Configuring the Manager, or if you wish to change those settings using the
terminal menus, select this option and enter up to four Host IP addresses as required.
IP 206.183.67.155
Port 23__
<F3> Save <F7> Quit
2-20
Up-Arrow
Down-Arrow
and
Host 0
C
at the Twin Client main menu below.
keys to navigate the menu, and press
F3
F7
to save and/or
to Quit, as shown below.
Supported Equipment Manual
none
, indicating
Enter
to select
•
May, 2006
Advertisement
Table of Contents
