RS-232 Interface Configuration
The programming bar codes in this section pertain
only to POS terminals with an RS-232 communica-
tion interface. In order for the POS terminal and
scanner to communicate, the scanner's configura-
tion must match the communication settings of the
POS terminal. Typically, the scanner's factory
default configuration has been preset to match
your POS terminal requirements.
RS-232 interface communication options are:
•
Baud Rate
•
Parity
•
Data Bits
•
Stop Bits
•
Hardware Control (CTS Flow/Scan Con-
trol)
•
Software Control (Xon/Xoff)
•
Host Echo
•
Intercharacter Delay
The RS-232 interface must first be se-
lected (reference the Interface Selection
section of this manual) before you can
set the RS-232 options in this section.
R44-1740
NOTE
71