Installing The Switch - Planet GSD-503 User Manual

receiving data over that port.
Lit: indicate that the port is ope
10 Green
Blink: indicate that the switch is actively sending o
receiving data over that port.
P ower Notice:
1. The device is a power-required device, it means, it will not work
till it is powered. If your networks should active all the time, please
consider using UPS (Uninterrupted Power Supply) for your device.
It will prevent you from network data loss or network downtime.
2. In some area, installing a surge suppression device may also
help to protect your switch from being damaged by unregulated
surge or current to the Switch or the power adapter.
2.2 Inst alling the Switch
This part describes how to install yo
make connections to it. Please read the following topics and perform
the procedures in the order being presented.
Note:
This switch does not need software configuration.
2.2.1 Desktop Installation
To install the switch on desktop, simply follow the next steps:
Step1: Attach the rubber feet to the recessed areas on the bottom of
the switch.
Step2: Place the switch on desktop near a DC power source.
Step3: Keep enough ventilation space between the switch and the
surrounding objects.
rating at 10Mbps.
ur Gigabit Ethernet Switch and
r