Pioneer RM-V1000NU Technical Manual page 45

ADJUSTMENTS
(3) Convergence Adjustment Contents
1 Measurement of screen center
The center can be found easily by pasting threads in
the spaces of the protection panels at the screen
frame.
2 Adjustment signal input
For adjusting size ..................................................... Frame size picture(EX.LD Test disc GGT1072, FRAME No.
For screen joining, linearity, color adjustment. ..... Use adjustment signals such as , cross-hatch, etc. (EX. LD
(Note)
For the particulars about the FRAME No.,etc. of LD Test disc GGT1072,refer to the disc manual differently.
3 Center adjustment
Set to only green and adjust the center with
V STATIC GH STATIC .
44
&
The numbers correspond to the numbers in the
flow-chart.
5941),Monoscope, etc.
Test disc GGT1072, FRAME No. 7081,etc.)
V STATIC
GH STATIC
Center