Vertical Compression Filter Conversion Rate Input [Lcv Command]; Program Rom Version Display [Ver Command]; To Indicate The Current Function Setting [Sts Command] - Pioneer RM-V1000NU Technical Manual

Vertical Compression Filter Conversion Rate Input [LCV command]

Input : LCVd d d
1 2
Explanation : • d d =00 to 15 (Add 0 before all numbers below 9) Vertical direction rate before conversion
1 2
• d d =00 to 15 (Add 0 before all numbers below 9) Vertical direction rate after conversion
3 4
Due to the use of a compression filter, the condition is d
Both LCV0000 and LCV0101 are not convertible.
• Directly changes the vertical filter conversion rate of the data table of the model using the VS
board currently.
• When the conversion rate is changed for DSY, the image compressed by the new conversion rate
will be output.
(Example)
: LCV0605

Program ROM Version Display [VER command]

Input : VER
Explanation : • Indicates the version of the program ROM mounted in the current VS board.
(Example)
: VER
PROGRAM VERSION=BXY1004-X VX.XX 199X.XX.XX

To Indicate the Current Function Setting [STS command]

Input : STS
Explanation : • Displays the model data No., selected state (auto or forced), vertical filter ON, OFF, and freeze
ON, OFF selected by the VS board currently.
(Example)
: STS
STATUS=DSY, FZN
MODEL NO.=09 AUTO
: STS
STATUS=DSY, FZN
MODEL NO.=03 FIXED
d
3 4
Set 6–>5 conversion
> d
d
=
1 2
Autolocks to PC9801 with the left display, indicates vertical
filter ON, freeze OFF.
Forcible locks the Macintosh with the left display, indicates
vertical filter ON, freeze OFF.
APPENDIX (Manual)
d .
3 4
129