Video Output Mode Of Mvp - Pioneer RM-V1000NU Technical Manual

VIDEO OUTPUT MODE OF MVP

¶ The video output formats set by the mode switches are as shown in the following table.
(At shipment, the mode switch value is set to "8".)
Mode switch No. Bus format
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
¶ Bus format
¶ Output format
¶ Sync signal frequency
¶ Trunk piece mitigation mode : It is the function that mitigates the trunk piece phenomenon by multiple visions
(Note)
MPJ inputs can only be set to the standard speed. Double-speed playback cannot be performed.
Output format
VBS, Y/C
NTSC
RGB
VBS, Y/C
NTSC
RGB
: NTSC .............. NTSC digital signal transmission method.
: VBS (VIDEO signal), Can be switched between Y/C and RGB.
However, VBS and Y/C can only be used for the standard speeds.
: Standard speed ..... Horizontal 15.734 kHz, vertical 59.94 Hz interlace
: Double speed ......... Horizontal speed 31.469 kHz, vertical 59.94 Hz non-interlace
unique scanning line structure. There is a difference in an effect by the magnifi-
cation ratio and it is more effective as smaller of the magnification ratio. Yet, it
does not work in vertical magnification ratio X1.
Sync signal frequency
Standard speed
Double speed
Reserved
Standard speed
Double speed
Reserved
APPENDIX (MVP manual)
Trunk piece mitigation mode
OFF
ON
109