Tracking Adjustment [Trk Command]; Contrast Adjustment [Cnt Command]; R, G, B Gain Adjustment [Rgn, Ggn, Bgn Commands]; Bright Adjustment [Brt Command] - Pioneer RM-V1000NU Technical Manual

Tracking Adjustment [TRK command]

Input : TRKd d d
1 2
Explanation: • d d d : Compensation data 0 to 254
1 2 3
• Eliminates lateral vibration of displayed characters, shaking, and noises.
• A vertical line pattern in which the black and white lines change every dot as shown below is the
ideal for adjustments.

Contrast Adjustment [CNT command]

Input : CNTd d d
1 2
Explanation: • d d d : Compensation data 0 to 254
1 2 3
• Use this command to adjust the contrast.
• Use this command to adjust so that the contrast of the images produced by the MVP matches the
contrast of the actual images of the computer.
• Tracking may deviate in some cases when CNT adjustment is performed after TRK adjustment.
After adjusting CNT, adjust TRK.

R, G, B Gain Adjustment [RGN, GGN, BGN commands]

Input : RGNd d d
1 2
Explanation: • d d d : Compensation data 0 to 254
1 2 3
• GGN : Green gain adjustment
RGN : Red gain adjustment
BGN : Blue gain adjustment
• Use this command to adjust so that the white balance of the images produced by the MVP
matches the white balance of the actual images of the computer.
• Tracking may deviate in some cases when gain adjustment is performed after TRK adjustment.
After adjusting gain, adjust TRK.

Bright Adjustment [BRT command]

Input : BRTd d d
1 2
Explanation : • d d d : Compensation data 0 to 254
1 2 3
• Use this command to adjust the bright.
• Use this command to adjust so that the bright of the images produced by the MVP matches the
bright of the actual images of the computer.
• Tracking may deviate in some cases when bright adjustment is performed after TRK adjustment.
After adjusting bright, adjust TRK.
3
3
, GGNd d d , BGNd d d
3 1 2 3 1 2
3
TRK adjustment
3
APPENDIX (Manual)
125