Quitting The System; Names Of Parts - Pioneer DDJ-SX Quick Start Manual

2 Press the [f] button to play the track.
3 Move the channel fader away from you.
4 Turn the [TRIM] control.
Adjust [TRIM] so that the orange indicator on the channel level indicator
lights at the peak level.
5 Turn the [MASTER LEVEL] control to adjust the audio
level of the speakers.
Adjust the sound level output from the [MASTER OUT 1] and [MASTER
OUT 2] terminals to an appropriate level.
Monitoring sound with headphones
Set the positions of the controls, etc., as shown below.
Names of controls, etc.
HEADPHONES MIXING control
HEADPHONES LEVEL control
1 Press the headphones [CUE] button for the channel 1.
2 Turn the [HEADPHONES LEVEL] control.
Adjust the sound level output from the headphones to an appropriate
level.
Note
This unit and the Serato DJ software include a variety of functions
enabling individualistic DJ performances. For details on the respective
functions, see the operating instructions and the Serato DJ software
manual.
! This unit's operating instructions can be downloaded from the
Pioneer DJ support site. For details, see Downloading this unit's oper-
ating instructions (p. 16).
! The Serato DJ software manual can be downloaded from "Serato.
com". For details, see Downloading the Serato DJ software manual (p.
16).

Quitting the system

1 Quit [Serato DJ].
When the software is closed, a message for confirming that you want to
close it appears on the computer's screen. Click [Yes] to close.
2 Press the [STANDBY/ON] switch on this unit's rear
panel to turn this unit's power off.
3 Disconnect the USB cable from your computer.
14
En

Names of Parts

1 Browser section
2 Deck section
3 Mixer section
4 Effect section
Browser section
Position
Center
Turned fully counterclockwise
1 LOAD button
2 Rotary selector
3 BACK button
4 LOAD PREPARE button
1 1 2 1 1
3 4