Pioneer DDJ-SX Quick Start Manual page 13

2 Press the rotary selector, move the cursor to the library on the computer's screen, then turn the rotary selector and
select the track.
b
a Library
b Crates panel
3 Press the [LOAD] button to load the selected track onto the deck.
Playing tracks and outputting the sound
The following describes the procedure for outputting the channel 1
sound as an example.
! Set the volume of the devices (power amplifier, powered speakers,
etc.) connected to the [MASTER OUT 1] and [MASTER OUT 2]
terminals to an appropriate level. Note that loud sound will be output
if the volume is set too high.
4
a
5
b
c
6
7
d
8
9
f g
e
h
4 TRIM control
5 EQ (HI, MID, LOW) controls
6 FILTER control
7 Headphones CUE button
8 Channel fader
9 Crossfader Assign Switch
a MASTER LEVEL control
b BOOTH MONITOR LEVEL control
c HEADPHONES MIXING control
d MASTER CUE button
e Crossfader
f HEADPHONES LEVEL control
g INPUT SELECT switch
h Crossfader curve selector switch
1 Set the positions of the controls, etc., as shown
below.
Names of controls, etc.
MASTER LEVEL control
TRIM control
EQ (HI, MID, LOW) controls
FILTER control
Channel fader
Crossfader Assign Switch
INPUT SELECT switch
a
Position
Turned fully counterclockwise
Turned fully counterclockwise
Center
Center
Moved forward
[THRU] position
[PC] position
13
En