Quitting The System; Can Be Downloaded From The Pioneer Dj Site. For Details, See Viewing The Latest Version Of The Operating Instructions (P - Pioneer DDJ-SB2 Operating Instructions Manual

Playing tracks and outputting the sound
The following describes the procedure for outputting the channel 1
sound as an example.
! Set the volume of the device connected to the [MASTER OUT] ter-
minals (power amplifier, powered speakers, etc.) to an appropriate
level. Note that the output sound may be loud if the volume is set too
high.
Mixer section
3
4
5
6
7
8
3 TRIM control
4 EQ (HI, MID, LOW) controls
5 FILTER control
6 Headphones CUE button
7 Channel fader
8 Crossfader
9 MASTER LEVEL control
a HEADPHONES MIX control
b HEADPHONES LEVEL control
c Channel level indicator
1 Set the positions of the controls, etc., as shown
below.
Names of controls, etc.
TRIM control
EQ (HI, MID, LOW) controls
FILTER control
Channel fader
MASTER LEVEL control
Crossfader
14
En
9
a
b
c
Position
Turned fully counterclockwise
12 o'clock position
12 o'clock position
Minimum (lowest) position
Turned fully counterclockwise
Center position
2 Press the [f] button to play the track.
3 Turn the [TRIM] control.
Adjust the [TRIM] control so that the channel level indicator's orange
indicator lights at peak level.
4 Move the channel fader to the maximum level.
5 Turn the [MASTER LEVEL] control to adjust the audio
level of the speakers.
Adjust the audio level output from the [MASTER OUT] terminals to an
appropriate level.
Monitoring sound with headphones
Set the positions of the controls, etc., as shown below.
Names of controls, etc.
HEADPHONES MIX control
HEADPHONES LEVEL control
1 Press the headphones [CUE] button for the channel 1.
2 Turn the [HEADPHONES LEVEL] control.
Adjust the sound level output from the headphones to an appropriate
level.
Note
This unit and the Serato DJ Intro software include a variety of functions
enabling individualistic DJ performances. For details on the respective
functions, see the operating instructions and the Serato DJ Intro soft-
ware manual.
! The operating instructions of this unit can be downloaded from the
Pioneer DJ site. For details, see Viewing the Latest Version of the
Operating Instructions (p. 21 ).
! The Serato DJ Intro software manual can be downloaded from
Serato.com. For details, see Downloading the Serato DJ Intro software
manual (p. 21 ).

Quitting the system

1 Quit Serato DJ Intro.
When the software is closed, a message for confirming that you want to
close it appears on the computer's screen. Click [Yes] to close.
2 Disconnect the USB cable from your computer.
Position
12 o'clock position
Turned fully counterclockwise