Quitting The System - Pioneer DDJ-SX2 Operating Instructions Manual

2 Press the [
PLAY/PAUSE f
SYNC OFF
3 Move the channel fader away from you.
4 Turn the [TRIM] control.
Adjust [TRIM] so that the orange indicator on the channel level indicator lights at
the peak level.
5 Turn the [MASTER LEVEL] control to adjust the audio level
of the speakers.
Adjust the sound level output from the [MASTER OUT 1] and [MASTER OUT 2]
terminals to an appropriate level.
Monitoring sound with headphones
Set the positions of the controls, etc., as shown below.
Names of controls, etc.
HEADPHONES MIX control
HEADPHONES LEVEL control
1 Press the headphones [CUE] button for the channel 1.
2 Turn the [HEADPHONES LEVEL] control.
Adjust the sound level output from the headphones to an appropriate level.
Note
This unit and Serato DJ software include a variety of functions that allow DJs to cre-
ate highly individualized performances. For details on the respective functions, see
the Serato DJ software manual.
! The Serato DJ software manual can be downloaded from "Serato.com". For
details, see Downloading the Serato DJ software manual (p. 28 ).

Quitting the system

1 Quit Serato DJ.
When the software is closed, a message for confirming that you want to close it
appears on the computer's screen. Click [Yes] to close.
2 Press the [STANDBY/ON] switch on this unit's rear panel to
set this unit's power to standby.
3 Disconnect the USB cable from your computer.
16
En
] button to play the track.
INST. DOUBLES INST. DOUBLES INST. DOUBLES INST. DOUBLES
FLIP
SLOT REC START
SAVE LOOP ON/OFF
SYNC OFF
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER
4 BEAT
Position
Center
Turned fully counterclockwise
CUE