Installing The Fuse (Model 447E Only); Charging The Battery (Model 447E Only) - Hayter R48 445E Operator's Manual

Installing the Fuse (Model
447E Only)
Your mower comes with a 40-amp fuse that protects the
electric starter.
Important: You cannot start the mower with the
electric starter or charge the battery unless you
install the fuse.
1. Remove the battery cover and the battery and locate
the fuse holder (Figure 7).
1. Screw
2. Battery cover
2. Insert the fuse (from the loose parts bag) into the
fuse holder (Figure 8).
Note: Your mower comes with a fuse in the owner's
packet and another fuse in the battery box.
3. Install the battery and the battery cover.
Figure 7
3. Fuse holder
4. Battery
Figure 8
Charging the Battery (Model
447E Only)
Refer to Charging the Battery in the Maintenance
section.
7