Using The Grass Bag - Hayter 455E Operator's Manual

Adjusting the cutting height levers could bring
your hands into contact with a moving blade
and result in serious injury.
• Stop the engine and wait for all movement
to stop before adjusting the cutting height.
• Do not put your fingers under the housing
when adjusting the cutting height.
1. Pull the wheel height adjustment lever toward the
wheel (Figure 18) and move it to the desired setting.
Figure 18
1. Wheel height adjustment lever
2. Release the wheel height adjustment lever and seat
it securely in the notch.
3. Adjust all the wheels to the same cutting height
setting.

Using the Grass Bag

Installing the Grass Bag
1. Wait for all moving parts to stop.
2. Raise and hold up the rear door (Figure 19).
1. Rear door
3. Install the bag on the bag mounting posts
(Figure 20).
1. Bag mounting posts
4. Lower the rear door.
Removing the Grass Bag
To remove the bag, reverse the steps above.
The mower can throw grass clippings and other
objects through an open discharge tunnel.
Objects thrown with enough force could cause
serious personal injury or death to the operator
or bystander.
Do not operate the mower without a grass bag
installed.
14
Figure 19
Figure 20