Recording A Source - Meridian 502 User Manual

Recording a source

The 502 Analogue Controller allows you to copy any one of the
standard sources to the tape outputs, independently of the
source you are listening to.
To copy a source to the tape output
Press Copy.
Each time you press Copy the analogue controller will step
between the following options:
Display
C. S ou rce
C. Mu te
C. CD
C. Ra dio
When Copy is set to anything other than Copy Source the Copy
indicator is illuminated on the front panel.
12
Option
Copy Source. The current source is
fed to the tape output.
Copy Mute. The tape output is
muted.
Copies the first source to the tape
output.
Steps through each source in turn,
etc.
For example, to record from the radio
press Copy until the display shows:
You can now listen to a CD, by selecting the CD source, without
affecting the recording.
C. Radio