Selecting A Source - Meridian 800 User Manual

USING THE DVD/CD PREFACE
PLAYER PREAMPLIFIER
FEATURES
Your
installer may have
customised the labels displayed
for each source to suit your
other equipment
The DVD/CD player
mutes the sound while you
change source.

Selecting a source

The 800 Reference DVD/CD Player can be used as a system controller to
select sources within a Meridian system. It can also be confi gured to
provide video switching for specifi ed sources.
The DVD/CD player provides the following 12 sources:
CD, Radio, LP, TV, Tape 1, Tape 2, CDR, Cable, DVD, VCR1, VCR2,
LDisc.
The DVD and CD sources usually correspond to the internal
drive(s).
The video input associated with each of the other sources
depends on how the DVD/CD player has been set up; for more
information refer to the Meridian Confi guration Program Guide, available
separately.
To select a source
• Press Source (under the front panel) until the display shows the source
you want, or press the appropriate source key on the remote; eg CD.
The display shows the source and volume setting.
For example, if you select the Radio
source the display might show:
Radio
32
65