Chicago Electric 93213 Set Up And Operating Instructions Manual page 9

Mounting a grinding Wheel
Refer to the Assembly Drawing on page 10.
FIguRE 3
Top Housing (4B)
1. Raise the Top Housing (4B) and lock it
in the up position by tightening the Lock
Stop (6).
2. Remove the four screws holding the
Grinding Wheel Cover (11B). Set the
cover aside.
FIguRE 4
grinding
Wheel (8)
grinder Lock Cap (9)
3. Unscrew the Grinder Lock Cap (9) that
holds the Grinding Wheel (8) in place.
4. Install the new wheel on the Grinding
Wheel Base (7), making sure it fits
properly.
Note: Do not use a grinding wheel if it is
chipped, cracked, or worn. You can
check if the wheel has cracks not visible
SKU 93213
grinding Wheel
Cover (11B)
Lock Stop (6)
For technical questions, please call 1-800-444-3353.
to the human eye by hanging it up by
the central hole and tapping it with a non
metal object (ie: screwdriver handle). If
it is in good condition it will produce a
metallic sound. A dull sound indicates a
crack or break.
5. Replace the Grinder Lock Cap (9).
6. Replace the Grinding Wheel Cover
(11B).
7. Release the Lock Stop (6) and lower the
Top Housing (4B).
8. Never operate tool without the Grinding
Wheel Cover in place.
REV 10c
Page 9