Chicago Electric 93213 Set Up And Operating Instructions Manual page 3

attachment to do the work of a larger
industrial tool. There are certain
applications for which this tool was
designed. It will do the job better and
more safely at the rate for which it was
intended. Do not modify this tool and do
not use this tool for a purpose for which it
was not intended.
8. dress properly.
clothing or jewelry as they can be caught
in moving parts. Protective, electrically
nonconductive clothes and nonskid
footwear are recommended when
working. Wear restrictive hair covering
to contain long hair.
9. Wear proper eye protection.
wear ANSI-approved impact safety
goggles under a full face shield during
use and service.
do not overreach.
10.
and balance at all times. Do not reach
over or across running machines.
11. Maintain tools with care.
sharp and clean for better and safer
performance. Follow instructions for
lubricating and changing accessories.
Inspect tool cords periodically and, if
damaged, have them repaired by an
authorized technician. The handles must
be kept clean, dry, and free from oil and
grease at all times.
12. Avoid unintentional starting.
the switch is in the Off position when not
in use and before plugging in.
13. Stay alert. Watch what you are doing,
use common sense. Do not operate any
tool when you are tired.
14. Check for damaged parts.
using any tool, any part that appears
damaged should be carefully checked
to determine that it will operate properly
and perform its intended function. Check
REV 07h; 09h
SKU 93213
Do not wear loose
Always
Keep proper footing
Keep tools
Be sure
Before
For technical questions, please call 1-800-444-3353.
for alignment and binding of moving
parts; any broken parts or mounting
fixtures; and any other condition that may
affect proper operation. Any part that is
damaged should be properly repaired
or replaced by a qualified technician. Do
not use the tool if any switch does not
turn On and Off properly.
15. guard against electric shock.
body contact with grounded surfaces
such as pipes, radiators, ranges, and
refrigerator enclosures.
16. Replacement parts and accessories.
When servicing, use only identical
replacement parts. Use of any other
parts will void the warranty. Only use
accessories intended for use with this
tool. Approved accessories are available
from Harbor Freight Tools.
do not operate tool if under the
17.
influence of alcohol or drugs. Read
warning labels on prescriptions to
determine if your judgment or reflexes
are impaired while taking drugs. If there
is any doubt, do not operate the tool.
18. Maintenance.
maintenance should be performed
regularly by a qualified technician.
19. Secure tool to worktable.
20. Turn off before moving chain.
21. Never use the Electric Chainsaw
Sharpener around flammable
materials.
22. This product contains lead, which
is a chemical known to the State of
California to cause cancer and birth
defects or other reproductive harm.
(California Health & Safety Code §
25249.5, et seq.)
23. Exposure to aluminum oxide (a dust
generated from material removing
Prevent
For your safety,
Page 3