Chicago Electric 93213 Set Up And Operating Instructions Manual page 4

processes) can result in eye, skin
and breathing irritation. Always
use a NIOSH (National Institute for
Occupational Safety and Health)
approved respirator and safety goggles.
Avoid skin exposure.
24. People with pacemakers should
consult their physician(s) before use.
Electromagnetic fields in close proximity
to heart pacemaker could cause
pacemaker interference or pacemaker
failure.
25. WARNING: Handling the cord on this
product will expose you to lead, a
chemical known to the State of California
to cause cancer, and birth defects or
other reproductive harm. Wash hands
after handling.
(California Health & Safety Code §
25249.5, et seq.)
26. The warnings, cautions, and
instructions discussed in this
instruction manual cannot cover all
possible conditions and situations
that may occur. It must be understood
by the operator that common sense
and caution are factors which cannot
be built into this product, but must be
supplied by the operator.
grinding Wheel Warnings
1. Do not use a grinding wheel if it is
chipped, cracked, or worn. You can
check if the wheel has cracks not visible
to the human eye by hanging it up by
the central hole and tapping it with
a nonmetallic object (ie: screwdriver
handle). If it is in good condition it will
produce a metallic sound. A dull sound
indicates a crack or break.
2. Only use grinding wheels that fit the
Arbor (7/8"). Do not try to change or
modify the mounting hole on a grinding
wheel to make it fit. Grinding wheel
REV 09b
SKU 93213 For technical questions, please call 1-800-444-3353.
replacements are available at Harbor
Freight Tools.
3. Do not overtighten the Grinder Lock Cap
(9). Hand tighten it only. Overtightening
may cause the wheel to break or
disintegrate.
4. Never use the Chainsaw Sharpener
without the Grinding Wheel Cover (11B)
in place.
5. Always test the Grinding Wheel (8) by
running it for a minute prior to contact
with a chain.
6. Keep away from the wheel when it
is turning, and make sure no one is
standing close, in the line of the wheel
rotation trajectory.
7. If the grinding wheel vibrates, turn off
the machine immediately and check that
it is mounted securely, and that is not
damaged.
8. Never try to stop the grinding wheel with
your hands, even if you are wearing
safety gloves. The wheel will cut through
gloves and your hand, causing serious
injury.
9. Never operate tool without the Grinding
Wheel Cover in place.
10. Replacement grinding wheel listed speed
must meet or exceed RPM rating of the
tool.
11. Use only flanges furnished with the tool.
12. This machine is designed to sharpen
chainsaw chains. Do not attempt to
sharpen any other tools, and do not
attempt to grind any other objects.
Page 4