Out Of Balance Recovery Routine; Auto Water Fill Level - Fisher & Paykel Ecosmart GWL11 Installation Instructions And User Manual

Changing Pre-Set Options

Out of Balance Recovery Routine

When your Ecosmart is spinning it can sense if the wash load is out of balance and will stop
and re-try spinning up to 3 times. If the machine still senses an unbalanced load there are two
options the machine offers.
Automatic Recovery Option:
Your Ecosmart will try to automatically
correct the out of balance load. It will fill with
water and agitate to redistribute the load
before trying to spin up again.
Machine Stops Option:
Your Ecosmart will stop, giving a short burst
of beeps every five seconds and the RINSE
or SPIN light will flash. You must redistribute
the load more evenly yourself. (Use this
option if you wish to conserve water.)
Enter the Option Adjustment Mode.
1.
Use the REGULAR button to select the Out
2.
of Balance Recovery Option you prefer.
Press Power to store your selection.
3.

Auto Water Fill Level

If you are not satisfied with the level that your
Ecosmart fills to on AUTO WATER LEVEL, you
can alter the fill level that Auto will select.
If you feel there is too much water, you can
decrease the fill level that will be selected.
Enter the Option Adjustment Mode.
1.
Use the CYCLE buttons to decrease the
2.
amount of water selected.
Press POWER to store your selection.
3.
If you feel that there is not enough water for the load, we recommend that you check by
pausing the machine and pushing the clothes down to see how much spare water is at the
bottom of the wash basket. Clothes often float and your Ecosmart can sense the water under
the clothes. Failing this, you might like to select a higher water level manually.
28
Out of Balance Recovery Options
Regular
Light on =
Light off =
Auto Water Level Adjustment
Light on
FAVOURITE =
PERM. PRESS =
WOOL =
DELICATE =
HEAVY DUTY =
automatic recovery
machine stops
less water
less water
less water
less water
factory setting