Pentax OPTIO WS80 Operating Manual page 56

The Memory function is for saving the current camera settings when the
camera is turned off.
For some camera settings, the Memory function is always set to _ (On)
(the settings are saved when the camera is turned off), while for others
you can choose on or off (to choose whether the settings are saved or
not when the camera is turned off). The items which can be set to _ (On)
or [] (Off) in the Memory function are shown in the table below. (Items
not listed here are always saved in the selected settings when the
camera is turned off.)
If you select _ (On), the settings wilt be saved in the status they were in
immediately before the camera was turned off. If you select [] (Off), the
settings wilt be reset to the defaults when the camera is turned off. The
table below also shows whether the Memory default setting for each item
is on or off.
Default pag e
Setting
Face Priority A Face Recognition mode set by using the [@_] b utton [] p.76
Flash Mode The flash mode set with the four-way controller ( _1) _ p.105
p.95
Drive Mode The drive mode set with the four-way controller (A) [] p.96
p.98
Focus Mode The focus mode set with the four-way controller (1_) [] p.107
Zoom Position The zoom position set with the zoom button [] p.82
The manual focus position set with the four-way
MF Position controller (A v) [] p.108
White Balance The [White Balance] setting on the [1_1 Rec. Mode] [] p.114
menu
Sensitivity The [Sensitivity] setting on the [1_ Rec. Mode] menu [] p.117
EV The [EV Compensation] setting on the [] p.112
Compensation [1_1 Rec. Mode] menu
AE Metering The [AE Metering] setting on the [1_1 Rec. Mode] menu [] p.116
Digital Zoom The [Digital Zoom] setting on the [1_1 Rec. Mode] menu _ p.83
The information display mode set with the
DISPLAY OK/DISPLAY button [] p.23
If a new SD Memory Card is inserted when _ (On)
File No. has been selected, file numbers are assigned _ --
sequentially